Fitness Republic Neoprene Dumbbells Pairs (3lb, 5lb, 8lb, 10lb, 12lb) with 5 Tier Rack
Fitness Republic Neoprene Dumbbells Pairs (3lb, 5lb, 8lb, 10lb, 12lb) with 5 Tier Rack
Fitness Republic dumbbell rack is an easy steel construction powerhouse. Designed specifically for indoor use, it occupies least volume in your home. Available in 3 tiers and 5 tiers sizes, this durable rack is constructed to last, offer sturdy support under most strenuous workouts. Galvanized screws ensure rust irritants and prevent accumulation of oil compounds on the surface of the rack.
Usage & Safety Instructions
Fitness Republic dumbbell rack comes in two sizes and each can withstand a compound weight of: • 3 tier – 120lbs & • 5 tier – 200lbs. Dumbbell types that can be stacked are neoprene, vinyl and rubber
Assembly
The dumbbell rack comes un-assembled and requires a step-by-step construction:
Tools Needed: Screwdriver, adjustable wrench or spanner
• To assemble the dumbbell rack, first unpack all components and locate the hardware.
• There are two bottom shelves and one separator
• Take the bottom shelves, align them parallel, place separator in the center and use 80mm galvanized screws to tighten this component section from both sides.
• Once the base is secured, take the side panels, position them upwards/vertically paralleled onto the bottom shelf.
• Now take the TOP on top of the assembly and bolt together 16mm screws.
• Nuts go inside with flat heads flush on the upper surface. Leave bolts finger tight.
The rack should be placed on a flat floor surface. If this is not possible you will need to level the top of the rack for best performance. Tighten all the bolts to firm up the rack.
Product Features
- Stackable weights neoprene, vinyl and rubber dumbbells
- The rack is ideally mobile and occupies least volume when assembled
- Made Type: Neoprene Dumbbells are made up of cast iron coated with soft and smooth neoprene coating matte finish for a comfy-grip workout
- Available in 3 holders & 5holders
- Weight capacity: (3 holders: 120lbs), (5 holders: 200lbs) – Manufacturers Warranty Included (12 Months) – Dimension: (33×29.5×43.5cm)
Loading...
Glad I did my homework first In the process of setting up a dedicated workout space, I decided that after 15 years my dumbbells needed some kind of permanent storage. I read through reviews on many other dumbbell racks, which sounded like they wouldn’t work well with my smaller dumbbells(8 lbs and under) because of bars being too far apart for a shelf with bars across, cheaply made, or the space for the weights to go in wasn’t the right sizing I needed. I got this instead of all the other options I looked into, even…
) but was super easy to put together once I figured that out